- Cables & Adapters
- Chargers & Power Supplies
- Ribbon Cartridges
- Vacuum Cleaner Accessories
- Printer Accessories
- Electric Razor Accessories
- Camera Accessories
- Power Tools & Garden Equipment Accessories
- Spare Parts for Household Appliances
- Multimedia Accessories
- Hobby Accessories
Power Tools & Garden Equipment Accessories
Some people like to tinker with their machines and others prefer to take care of their gardens. Just for you tinkerers and gardeners, we have made an immense selection of spare parts for tools as well as for gardening tools available in our online store.
Tool & Garden equipment chargers and batteries
Especially when working in the garden or in the garage, you want to finish quickly and efficiently. But if then an electric garden tool, due to an inferior or defective battery already after a short time must be recharged again and again or does not work at all, this can be very annoying. That's why it makes sense to make sure that the battery or charger you're using works as efficiently as possible. Therefore, just take a look at our bestsellers for rechargeable batteries as well as our bestsellers for chargers. You are guaranteed to find the right product for your device.
Carbon brushes are a frequent reason for equipment failures in the field of electrical tools. This is because they are responsible for the electronic contact between motors or generators and the slip rings or the collector - among other things, this is why they are usually made of graphite. Without functioning carbon brushes, many devices lose their function.
Fortunately, in such cases, the entire device does not have to be replaced. Moreover, carbon brushes are available at extremely low cost.
Replacing carbon brushes
Before replacing the carbon brushes, the power supply must be cut off in any case. This is done either by unplugging the power cord or removing the battery. After all, safety comes first.
Afterward, two external access points should be visible or the machine must be unscrewed. Already when opening the machine, you should pay attention to which screws have sat where - this tip is essential for every machine and device with different screws. If the screws are not in their intended places, the device cannot be correctly assembled and put into operation.
Once the casing is removed, the carbon brushes are also already more or less exposed. All that is required here is to replace the old brushes with new ones. It should be noted that the carbon brushes should be placed exactly in the same position as the replaced old brushes. It is also advisable to clean the inside of the device at the same time so that any dirt that may be present in the future does not lead to further problems and the device has to be screwed on again.
Finally, everything must be screwed back together before the machine can be used again. By the way, you can find inexpensive carbon brushes in our online store.
Sufficient lighting has always been a central aspect of many jobs, often even in broad daylight. If there is not enough light, it can be dangerous. With the help of the right light source, many mistakes can be avoided, thus increasing productivity. That's why the right construction light is essential for the safety of professional users and also available at ElectroPapa at a reasonable price.
Drill chuck wrench for drilling machines
Always being flexible and able to adapt to the conditions is a high priority when working with drilling machines. Now, unfortunately, it can often happen that in the heat of the moment the drill chuck key is lost or even broken. In such cases, we recommend the robust and cost-effective drill chuck key from our own brand vhbw.
Electric motor for drills
But it's also best to never run out of energy while you're working, so after all, you regularly make sure that your own equipment is always charged. But what if the device itself no longer runs as effectively as before and the electric motor seems to age faster and faster? For such cases, there is electric motors for your cordless drills.
Drill chuck for drills
Knowing how to change the drill chuck on your drill can be extremely helpful. This may be necessary for a drill chuck that no longer runs smoothly or is simply outdated. However, you should pay attention to what type of drill chuck you choose. For example, there are two basic distinctions: Keyless drill chucks and gear rim drill chucks.
With a quick-action drill chuck, it is possible to change the clamped insert tools by hand and thus quickly. However, if you want to stick with the tried and true, you can also opt for the classic gear rim drill chuck.
The maintenance of machines and equipment is a high priority of every hobby tinkerer and gardener. So, if you attach a lot of importance to the durability of your equipment as well as the high quality of your work, you should also use appropriately suitable polishing discs.
Exactly for such maintenance work and the like, we offer a selection of high-quality polishing discs in our online store, so that you can always do an excellent job.
To achieve even cuts with your saw, you need the right saw blade. Here it is important to pay attention to the number of teeth. When it comes to ripping wood lengthwise, a coarser saw blade with fewer teeth makes more sense than a finer one with more teeth. Conversely, however, a fine saw blade with many teeth is particularly suitable for fine-cutting edges in cross-cuts.
The spark plug of a gasoline chainsaw is essential to its function. It is responsible for igniting the saw's engine in the first place, so that it starts. These small, inconspicuous parts have to withstand the extreme conditions of high heat and constant strong vibrations inside the chainsaw.
For example, the spark plug of a chainsaw must be replaced after approximately 20,000 to 30,000 kilometers. The approximate usage time can be calculated based on the manufacturer's specifications and factors such as average usage time. Since the spark plug is so important for the proper use of a gasoline chainsaw, it is particularly worthwhile to pay attention to high-quality goods.
So if you own a Stihl MS 181, for example, we have just the right thing for you with our low-priced set. If, on the other hand, you own a Stihl 018, we also have a suitable set in our store.
What doesn't fit, will be made to fit - this is true in many areas of life and it is no different in the field of tools. Whether it's spraying attachments for high-pressure cleaners or one of our many adapters for rechargeable batteries, no one will be disappointed in our online store. If you are not quite sure which model you need, we are of course available around the clock with our support.
Wherever you saw, chips fall: But even for sanding work, it is important to make sure that the removed material is collected and held well. If this is not the case, there will normally be annoying soiling of the work area and, in the worst case, health consequences.
Therefore, ensure that there are always enough high-quality dust bags for future work. For this reason, we at ElectroPapa always make sure to provide you with only the best materials so that you can focus on the work and not worry about the trappings.
So, for example, if you are the proud owner of a Metabo sander such as the SR 216 model (among many others), we have just the right dust bags for you. But even if you have another model, such as a Metabo SR 356 or SX E 450 Duo, we can help you.